JN0-363 Practice Mock - Valid JN0-363 Exam Tutorial

P.S. Free & New JN0-363 dumps are available on Google Drive shared by BraindumpsVCE: https://drive.google.com/open?id=1DWm0WxFUCGvP15IywyLqAc6HVUYAFTCS

It follows its goal by giving a completely free demo of real Juniper JN0-363 exam questions. The free demo will enable users to assess the characteristics of the Juniper JN0-363 Exam product. BraindumpsVCE will provide you with free Juniper JN0-363 actual questions updates for 365 days after the purchase of our product.

The JNCIS-SP Certification is a valuable credential for networking professionals who work in service provider environments. It demonstrates a high level of expertise in Junos software and service provider routing and switching technologies. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification can lead to career advancement opportunities, such as senior network engineer or network architect roles.

>> JN0-363 Practice Mock <<

Valid JN0-363 Exam Tutorial, JN0-363 Test Questions

Our JN0-363 exam guide is suitable for everyone whether you are a business man or a student, because you just need 20-30 hours to practice on our JN0-363 exam questions, then you can attend to your JN0-363 exam. There is no doubt that you can get a great grade. If you follow our JN0-363 learning pace, you will get unexpected surprises. What are you waiting for? Just choose JNCIS-SP guide question to improve your knowledge to pass JN0-363 exam, which is your testimony of competence. You will get what you are dreaming for.

The JN0-363 exam is a prerequisite for many advanced Juniper certifications, including the Juniper Networks Certified Internet Specialist (JNCIS-SP) and the Juniper Networks Certified Internet Expert (JNCIE-SP). Passing JN0-363 Exam demonstrates to potential employers that an individual has the skills and knowledge necessary to design, configure, and troubleshoot complex routing and switching networks in a service provider environment.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q32-Q37):

NEW QUESTION # 32
Exhibit

Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)

A. R3 is considered a P router.
B. R3 is considered a transit router.
C. R3 is considered an ingress router.
D. R3 is considered a PE router.

Answer: A,B

Explanation:
In a service provider MPLS network, P routers are interior routers that are used to transit MPLS-labeled packets between edge routers but do not attach or remove MPLS labels themselves. These routers are also referred to as transit routers. They are neither ingress nor egress routers (which are typically labeled as PE routers).
Reference:
Juniper Networks documentation on MPLS: MPLS Fundamentals

NEW QUESTION # 33
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?

A. 0
B. 1
C. 2
D. 3

Answer: D

NEW QUESTION # 34
You are asked to configure filter-based forwarding on a Junos device.
Which two statements are correct in this scenario? (Choose two.)

A. You must create a route target.
B. You must create a routing policy.
C. You must create and apply a match filter.
D. You must create a routing instance.

Answer: B,C

Explanation:
Filter-based forwarding in Junos requires the creation of a routing policy to specify the match conditions and actions and the application of a match filter to classify traffic to use the policy.
Reference::
Filter-Based Forwarding Overview, Juniper Networks Documentation
Example: Configuring Filter-Based Forwarding, Juniper Networks Documentation

NEW QUESTION # 35
Click the Exhibit.

Referring to the exhibit, which two statements are true? (Choose two.)

A. The LSP is protected with link protection.
B. The last node in the path will not pop the MPLS label.
C. The LSP is protected with fast reroute.
D. The last node in the path will pop the MPLS label.

Answer: A,D

NEW QUESTION # 36
Interface ge-0/0/0.0 connecls yout network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP.
In this scenario, how is this task accomplished?

A. Add ge-0/0/0.0 as a passive interface In OSPF.
B. Create a generated route for Interface ge-0/0/0.0.
C. Configure a static route for Interface ge-0/0/0.0.
D. Remove interface ge-0/0/0.0 from OSPF.

Answer: A

Explanation:
When you want to advertise an interface in OSPF but not form an OSPF adjacency over that interface (for example, towards an ISP), you can configure the interface as passive. This will advertise the network on the interface in OSPF without sending OSPF hello packets or forming OSPF neighbor relationships on that interface.
Reference:
Juniper Networks Technical Documentation on OSPF
OSPF Configuration Guide - Juniper Networks

NEW QUESTION # 37
......

Valid JN0-363 Exam Tutorial: https://www.braindumpsvce.com/JN0-363_exam-dumps-torrent.html

BONUS!!! Download part of BraindumpsVCE JN0-363 dumps for free: https://drive.google.com/open?id=1DWm0WxFUCGvP15IywyLqAc6HVUYAFTCS

0

Course Enrolled

0

Course Completed

Ken Bell Ken Bell

About me

JN0-363 Practice Mock - Valid JN0-363 Exam Tutorial

Valid JN0-363 Exam Tutorial, JN0-363 Test Questions

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q32-Q37):

0

0

Sign in